– January , 2018
I have served in the editorial board of the Journal of Food Engineering starting from 2010, and, as of January 1, 2018, I have started acting as Editor .
– June 5-8 , 2017
We are going back to Italy again from 5th to 8th of June 2017 for the 2nd International School on Modeling and Simulation in Food and Bio Processes MSFS2017. It will be held in Seiano, Italy.
– May 10-12, 2017
Drs. Dagbjorn Skipness and Torstein Skara from Nofima (Stavenger, Norway) was in Ankara to visit our lab – facilities and to discuss over the possible future collaborations. This visit was due to my graduate student Ozan Altin`s valuable 10 months (from July 2016 to April 2017) in Nofima and our recent project SUNNIVA (under SUSFOOD call).
– April 7-8, 2017
I was in Stavenger, Norway for the final project meeting of the SUNNIVA (Sustainable food production through quality optimized raw material production and processing technologies for premium quality vegetable products and generated by-products)project meeting, hosted at the NOFIMA facilities.
– March 23-24, 2017
I was in Lisbon, Portugal where the 2nd Working Group meeting (March 23rd) and first Action Workshop (March 24th) were carried out at the Instituto Superior de Agronomia.
– March 19-22, 2017
My colleague, Dr. Fabrizio Sarghini from University of Naples Federico II (Naples, Italy) visited under the short term scientific mission (STSM) of the cost action, FoodMC (CA15118 – Mathematical and Computer Science Methods for Food Science and Industry).
– November 28-30, 2016
I was in Vienna, Austia where the 30th EFFoST Conference (Targeted Technologies for Sustainable Food Systems) was carried out. From our study group, the following study was presented:
Erdogdu, F.,“Food structure effects for process design and modeling” Oral presentation
– October 26-28, 2016
I was in Antalya, Turkey where the 2nd Food Structure Design Congress was carried out. The following study was presented as invited speech:
Erdogdu, F.,Tokur, B., Yavuz, H., Aksun, E.T. and Tumerkan, T. “Introducing toroid cans for canning industry for energy savings and better quality products,” 30th EFFoST International Conference, Vienna, Austria, 2016. Oral presentation.
– October 20-21, 2016
I was in Versailles, France where the management committee and working group meeting of the cost action, FoodMC (CA15118 – Mathematical and Computer Science Methods for Food Science and Industry). I have joined the meeting as the management committee member.
– July 6-8, 2016
I was in Vienna, Austria where the 4th ISEKI Conference (Responsible research and innovation in the food value chain) was carried out.
From our study group, the following studies were presented:
Bobus Alkaya, G., Erdogdu, F., Halkman, A.K. and Ekiz, H.I. “Evaluation of Salmonella Entetirtidis decontamination on shell egg by infrared treatment” Oral presentation.
Altin, O., Erdogdu, F., Bedane, T. and Marra, F. “A virtual design of radio-frequency continuous system for optimal thawing” Oral presentation.
Erdogdu, F.,Tutar, M., Oines, S., Barreno, I., Skipnes, D. and Lovdal, T. “Computational determination of viscosity and agitation rate effects during reciptocal-agitated retort processing” Oral presentation.
– June 6-9 , 2016
I was in Capri island, Italy. From the 6th to the 9th of June 2016, the International School on Modeling and Simulation in Food and Bio Processes MSFS2016 was held in Anacapri, Capri Island, NA, Italy, attended by 35 participants from all the 5 continents, chosen among a higher number of applicants.
– April 28-29 , 2016
I was in Florence, Italy for the 4th project meeting of the SUNNIVA (Sustainable food production through quality optimized raw material production and processing technologies for premium quality vegetable products and generated by-products)project meeting, hosted by IFAC-CNR.
– March 7-11 , 2016
I was in Naples, Italy to visit my colleague Prof. Fabrizio Sarghini (Universita Degli Studi di Napoli Federico II). This visit is the outcome of his competitive proposal to invite me for a working period in the framework of “International Visiting Professor Program” where the proposal was classified in 7th position out of 32.
– November 10-12, 2015
I was in Athens, Greece where the 29th EFFoST Conference (Food Science Research and Innovation: Delivering sustainable solutions to the global economy and society) was carried out. From our study group, the following studies were presented:
Erdoğdu, F. and Marra, F. “Complexity in the virtualization of food processing and optimization” Oral presentation.
Sarghini, F. and Erdoğdu, F. “Computational modeliing of end-over-end (EOE) retort processing for canned foods with particulates” Oral presentation.
Erdoğdu, F. Tutar, M. Skipnes, D. Oines, S, and Lovdal, T. “Computational modeling of reciprocal-agitation retort process for canned liquid foods”. Oral presentation.
Uyar, R., Erdoğdu, F. and Marra, F. “Effect of projection area on radio-frequency heating of food products”
– June 14-18, 2015
I was in Quebec City, Canada where the 12th International Congress on Engineering and Food (ICEF12) was carried out. From ourstudy group, the following studies were presented:
Erdoğdu, F., “Heat Transfer Optimization for Food Processing – Smiling Face of Modeling”. Oral presentation.
Erdoğdu, F., Tokur, B.K., Yavuz, H., Aksun, E.T. and Timurkan, T., “Use of Toroid Cans to Produce Canned Tuna with Better Quality”.
Sarghini, F. and Erdoğdu, F. “Numerical Simulation for Heat Transfer and velocity Field Characteristics of Particulate Canned Food s during End-over-End Agitaion”. Oral presentation.
Marra, F., Bedane, T.F., Uyar, R. and Erdoğdu, F., “Virtualization of Food Thawing Assisted by RF Heating”.
– April 27-28, 2015
I was in Ghent, Belgium where the 3rd consortium meeting of the SUNNIVA (Sustainable food production through quality optimized raw material production and processing technologies for premium quality vegetable products and generated by-products) – a SUSFOOD project meeting was carried out in the facilities of ILVO (Institute for Agricultural and Fisheries Research).
– April 13, 2015
Dr. Abhishek Dutta, from KU Leuven, Belgium, to discuss for possible new research areas and to collaborate in the modeling based studies.
– April 8-9, 2015
I was in Izmir, Turkey for the “12. Ulusal Tesisat Mühendisliği Kongresi ve Teskon+Sodex Fuarı”. I was invited for an oral presentation on “Gıda proseslerinde soğutma işleminde vurgulu hava jetlerinin kullanımı“. Special thanks to the organizing committee and Prof. Dr. Onur Devres for this opportunity.
– February 22-24, 2015
My colleague, Dr. Francesco Marra from University of Salerno (Naples, Italy) visited under our bilateral Erasmus+ agreement to discuss for our future collaborations in the application of electromagnetic field.